Your success is our success!
Put our top quality equipment to use for your custom project!
[email protected]
905 246 7654

Wood

Wood is an awesome material to cut, sculpt and engrave – from hardwoods like oak to softwoods like pine, our laser and router can make short work of it regardless of the application. We can also work with engineered woods in raw or painted/treated form.

laser-engraving-2x6-5 Wood

Chunk of pine CNC laser engraved on all sides. (SEE HOW IT WAS MADE!)

The CNC technology we employ will be decided upon based on your specific application – this is a massive thing to remember – as we’ll use the best equipment for the best results, not try to jerry-rig our way through a project leading to less than stellar results. We also do a lot of work using live edge wood.

Planks or rounds, makes no difference as we spend our time making something top quality for you, either fresh from the kiln or aged with cracks and deeper engraving. Production happens in our shop, start to finish, so we have complete control from design through finishing.

laser-engraving-2x6-5 Wood
(SEE HOW IT WAS MADE!)

We can fit large pieces several meters long if desired, cut, engraved to suit just about any application, from MDF to wooden logs.

laser-engraving-2x6-5 Wood
(SEE HOW IT WAS MADE!)

Send us a challenge and we’ll rise up to meet and exceed your expectations.

laser-engraving-2x6-5 Wood

Maple board CNC laser engraved with a world map.

(SEE HOW IT WAS MADE!)

Some applications best suited to wood:

  • small arts and crafts
  • signage and displays
  • full-sized and miniature furniture
  • architectural models
  • wooden inlays
  • toys
  • marine paneling (base)
laser-engraving-2x6-5 Wood

Cedar plank CNC laser engraved with our logo!

(SEE HOW IT WAS MADE!)

Of course, the wood doesn’t have to be set on only one panel – there are endless creative uses behind engraving, cutting or marking wood from unique signage to marking shop pencils (yes, we have fun in the shop!)

CNCROi.com also has extensive experience designing and building wood models, visit our Model Making page.

laser-engraving-2x6-5 Wood

CNC laser engraving a wooden cottage on wood.

(SEE HOW IT WAS MADE!)

Cork is an especially nice material to work with as it provides a very high contrast when engraved and is quickly laser cut, visit our Cork Specific material page. We are also able to laser engrave and cut 3/4 inch laminated press wood!

laser-engraving-2x6-5 Wood
Engineered wood isn’t a problem for us, we can both cut thinner stock and engrave it for precise, repeatable results time and again.

laser-engraving-2x6-5 Wood
(SEE HOW IT WAS MADE!)

Regardless of your need, contact us to turn your wood engraving and cutting applications into reality!

laser-engraving-2x6-5 Wood
Please note that we can handle very high volumes, so if you need a thousand or several thousand of something, it’s not an issue for us to make and build them.

laser-engraving-2x6-5 Wood

Whether you want one or a thousand little fishies, we can do it!

(SEE HOW IT WAS MADE!)

laser-engraving-2x6-5 Wood
(SEE HOW IT WAS MADE!)

laser-engraving-2x6-5 Wood
(SEE HOW IT WAS MADE!)

For more information about wood visit http://cncroi.com/category/wood/.