Your success is our success!
Put our top quality equipment to use for your custom project!
laser-custom-whiteboard-1 Producing CUSTOM Dry Erase Whiteboards!

Producing CUSTOM Dry Erase Whiteboards!

Are you looking for the ultimate promotional item that your clients will actually use? How about a CUSTOM dry erase whiteboard! Produced by CNCROi.com‘s industrial Austrian CNC laser.

laser-custom-whiteboard-4 Producing CUSTOM Dry Erase Whiteboards!

These are NOT your typical cardboard coated dry erase whiteboards but a solid hardboard backed dry erase whiteboard. It’s strong, it will last and looks great hung on a wall. The added bonus of using a hardboard based whiteboard over cardboard is that it can be paint filled and because we are able to source massive sheets of this material, we can cut them to pretty much any size and shape you need.

laser-custom-whiteboard-4 Producing CUSTOM Dry Erase Whiteboards!

In this case, I used an offcut from another project, it just happens to already have CNCROi.com engraved into it. I wanted to test out how fine a line I could achieve around the outside edge before chipping became an issue and I needed a new dry erase whiteboard anyhow so this ended-up becoming a very functional test at the end of the day!

laser-custom-whiteboard-4 Producing CUSTOM Dry Erase Whiteboards!

In this case, I decided to use spray paint to fill in the design on the whiteboard, I also wanted to see how well the paint was absorbed along thin lines. After the design was engraved, cut and paint filled – I took all the masking off and the result look pretty good!

laser-custom-whiteboard-4 Producing CUSTOM Dry Erase Whiteboards!

Some slight chipping on the top left and bottom right quadrants but otherwise, a useful dry erase whiteboard what will be in the shop for some time! If you are wondering how CUSTOM this can take shape, here’s an example!

laser-custom-whiteboard-4 Producing CUSTOM Dry Erase Whiteboards!

Custom CNC laser cut and engraved dry erase whiteboard using our Trotec Speedy 400 flexx laser then paint filled.

The above was produced by sister company MarkingLove.com (click here to visit) which is the “non-corporate-applications” arm of CNCROi.com.We can cut these to form your logo, a special message to hang on the wall (dry erase whiteboards are EASY to keep clean btw!) and best of all, achieve up to 600 dpi engraving resolution that’s actually readable, especially if paint filled afterwards.

What’s especially nice about the technology behind our CNC laser is that we can engrave pretty much any material and paint it to act as a whiteboard as well – the creative possibilities are as endless as the applications!

The video below shows you the entire process, start to finish… if you are looking for a custom whiteboard provider, send us a note!