Custom Medical Drawer Organizers
When it comes to making custom medical drawer organizers, CNCROi.com has you covered regardless of how many items you need in a drawer or the number of drawers you need organized.
https://www.youtube.com/watch?v=9Ez9UoG_bT8/
Like their industrial counterparts, the reason for using custom medical drawer organizers (generally made out of foam) is to make sure no tooling or instruments are lost and to keep them safe, additionally, if your office has multiple shifts, knowing immediately if something is missing is vital!
Regardless of the application, tooling, instruments or sizing of the drawer, custom medical drawer organizers can be made out of any material, shape, size or volume by CNCROi.com.
As for durability, we use high density foam for our custom medical drawer organizers, but if you wanted something out of hard plastic or wood or any other material, the same process applies and we can make them custom to your spec as well, metal through foam.
CNCROi.com can also permanently brand metal, glass, plastic, wood and instruments directly regardless of their material composition.
https://www.youtube.com/watch?v=jHxFa9UsGMA/
For this specific application when making custom medical drawer organizers, we used our CNC laser but we have other tooling for other materials in the shop as well, the advantage of our CNC laser is that we can produce sharp inner corners and very fine details not possible using our CNC router.
The process of laser engraving also seals the foam along the edges, so you get an extra bit of durability built-in which isn’t possible using any other technology.
CNCROi.com can also make custom furniture to go with your custom drawer insert, we make all our own stuff in the shop and use it daily.
https://www.youtube.com/watch?v=PsvbVfkcgnY/
Generally for placement, you want to keep about half an inch between any two items, it makes the overall custom medical drawer organizers inserts stronger and makes removing tooling or surgical instruments far easier than having just everything squished together.
As for the thickness of the foam we use mostly at CNCROi.com for custom medical drawer organizers, it’s half inch or 12 mm, if you need something higher, then we just make stacks to work from so if you needed your foam drawer insert to be one inch high, we just stack two half inch foam inserts (in this case).
When it comes to actually sending us the files we need to produce your custom medical drawer organizers, just trace out what you need on paper and send it to us, from there we can digitize and make custom foam inserts, all same, all different, makes no difference to CNCROi.com‘s machinery!
Although completely unrelated, CNCROi.com can also make custom drawer front covers so if you wanted things outlined permanently and know what is where without having to open anything, we can do that too!
When it comes to shipping, foam is volumous but very light, as a result, sending a skid out shipped via freight works great, we really have no weight limits to contend with and it’s relatively inexpensive.
You might think that cutting a petroleum based product using high powered energy in an enclosed environment is pretty risky, and yes, it is, if you don’t know what you are doing or set-up to handle the combustible gases released but we’ve done THOUSANDS of these, we only ever had a fire once and because I’m next to the machine, it’s quickly taken care of.
When it comes to sizing, CNCROi.com can technically feed these custom medical drawer organizers through our machine but it’s quite rare this is needed as typical drawers are limited by the furniture they are put into.
If you prefer something hard for heavier instruments or tooling, CNCROi.com can make those as well.
https://www.youtube.com/watch?v=OZ8Rcclaelw/
As for shapes and sizing of instruments and tooling in the custom medical drawer organizers, it’s endless, circles, squares, rectangles, you can literally trace any mix of lines and CNCROi.com will cut it out and ship it right to your door!
Whether you are in the aerospace, military, education or whatever other field you may find yourself into, CNCROi.com can make custom drawer inserts just for your needs.
The bright light you see in the picture below is actually from the instant vaporization of the foam as our CNC laser cuts through the half inch 12 mm foam, it’s an instant process.
Have fun with colors, it’s just an added level of “where is that tool” being noticed.
https://www.youtube.com/watch?v=wJmugHqG75M/
When it comes to colors of the foam specifically, let us know what mix and match you like and we’ll find something close with our suppliers but keep in mind that the more you mix and match colors, the more complexity and cost you may be subject to regarding volume minimums so try to keep your color schemes down to 1-3 colors unless you have massive volumes.
When it comes to turnaround, once the files are digitized, CNCROi.com strives for a 24 hour turnaround if we have the material (we aren’t limited to just foam) in the shop already.
There are a ton of applications where custom medical drawer organizers can really be of a huge benefit to a hospital or clinic, instruments don’t get lost for instance, but we can also custom etch the instrument itself permanently for anti-theft and additional organizational benefits as well.
Whether you want your drawer inserts to all be made out of the same thickness and color of high density foam or different, we can accommodate your needs.
https://www.youtube.com/watch?v=35VSBUpL9K0/
What I really enjoy about cutting high density foam for custom medical drawer organizers is that I know these will be of good use and can play a direct role in helping to save lives, a doctor or nurse knowing exactly where an instrument is and not having to search is a HUGE BENEFIT when there is a medical emergency.
The only challenge when laser cutting custom medical drawer organizers is that sometimes the foam pops-up but we have enough vertical distance from the laser head to the foam surface to avoid any snag-ups but they do happen sometimes during production.
We’ve been in the custom drawer insert business for years, here’s one of my first videos on the subject!
https://www.youtube.com/watch?v=sU0H10wFvPU/
These custom foam organizers look amazing once done, they add a whole other level of professionalism to any office, hospital or clinic.
If you are wondering why the inner parts are kept in place, for this customer, they are making multiple levels and for shipping protection, it’s easier to just cut out what you want at what level.
Need custom medical drawer organizers? Contact CNCROi.com right now!
https://www.youtube.com/watch?v=TcjpqshudaU/