Custom Novelty Coins: Laser Engraved & Cut Oak
CNCROi.com can make custom novelty coins using any material but in this case, it’s reclaimed Oak boards that were resawed, planned and then laser engraved and cut to spec.
https://www.youtube.com/watch?v=NhblovD14MM/
Oak is a great material for custom novelty coins, it’s incredibly durable, has a high material density (great laser resolution) and can be endlessly customizable by CNCROi.com using power tools and CNC machines (router and laser).
I need to replace the blade on my bandsaw as I’m pushing more than cutting at this point as I cut through a few too many nails in some recent jobs at CNCROi.com but you can see the boards regardless need to be planned on both sides so they are not only clean but flat and parallel.
What the planner does is give me wonderful boards, all the same thickness, to then be able to laser engrave consistently, this also means that the custom novelty coins will all have the same thickness which is important.
The process is always the same with our laser when it comes to making these custom novelty coins, first step is engraving, second step is cutting, then it’s sanding and finishing before getting them shipped out to the customer.
CNCROi.com isn’t just limited to coins, we can also make banks to hold said coins too!
https://www.youtube.com/watch?v=5reSwows95o/
The grain pattern is greatly exaggerated in these photos because the lights in the laser are only slightly above the edge of the boards, they are very much flat.
The nice thing about laser engraving and cutting out these custom novelty coins is the built-in permanent contrast that’s achieved, meaning there is no paint to peel, crack or fade over time, all you see is solid oak and the charcoal produced by our CNC laser.
The nice thing about having custom novelty coins is that each may be made in the same way, with the same design, but due to grain patterns, each is very much unique and special in it’s own way.
Oak coins always look great, they are very unique and hold their value to anybody you hand them out to.
https://www.youtube.com/watch?v=MnEluXSJd78/
When it comes to laser engraving Oak, the results really do look amazing, they have a great feel to them and the weight is just about right.
As these are double sided custom novelty coins, I put a masking on the bottom because the laser will be cutting through it, there is a flame produced that shoots down and comes back up with a little soot, masking means I just remove that and I’m ready to engrave with little to no clean-up required at CNCROi.com during this production process.
The purpose of these coins are for handouts at religious events, as such, one side is branded and the other references to quotes from the bible.
Each coin can be customized as you see, CNCROi.com makes each one – one at a time – so your options for customization across an entire production cycle are endless.
https://www.youtube.com/watch?v=Zrwaf9H-OJ8/
These boards aren’t totally flat either, hence you can see that they drop slightly when they are being cut-out. I only cared that they were clean and parallel, not if they were dead flat across the entire board, because the coins are so small, they are flat and straight as an arrow.
You can begin to see the grain pattern and the laser engraving contrast created on these custom novelty coins being revealed.
I had quite a few coins to produce for this production run, the fronts were all the same but the backs were small batches of different bible references, as such, the focus was making the fronts all done first and then using a jig to individualize the backs of these custom novelty coins.
We are also able to make related items, so if you wanted coins to hand-out along with some matching boards and signage, we can produce those as well.
https://www.youtube.com/watch?v=A6nKh6UKxMk/
The bright light you see is the instant vaporizing of the wood surface, and charcoal production that happens shortly thereafter on CNCROi.com‘s laser platform.
Below you can see the quarter inch 6 mm jig I made to laser engrave the back of these custom novelty coins, orientation was actually pretty easy because of the very strong grain pattern on this Oak.
We can of course also make wooden stamps so if you are looking to go all rustic, CNCROi.com can help you with that just as easily.
https://www.youtube.com/watch?v=B_G1p4djcCI/
The lighting isn’t the best but you can see the laser engraving of the bible quotes on the back of these Oak coins.
A whole production run was made of these custom novelty coins at CNCROi.com and then the next step is to sand them and finish them with a semi-gloss protectorate.
You can see below the results after finishing and the very distinct and strong grain pattern on these custom novelty coins produced board to finished at CNCROi.com.
When it comes to custom novelty coins, we can make them any size, any species, shape or thickness you want using any design spec you have.
Want some custom novelty coins? Contact CNCROi.com right now!
https://www.youtube.com/watch?v=6V0rceVJLzc/