Flat Kitchen Countertops: CNC Routering Maple
Flat kitchen countertops are just one of the many uses CNCROi.com employs our full sheet CNC router to accomplish, these end-up not only clean and flat but also parallel across the whole board with zero deviation in height.
https://www.youtube.com/watch?v=dG-InGGf4kY/
Flat kitchen countertops are important because the last thing you want is to put a glass full of juice on a countertop and have it fall or roll or slip onto the floor, this is why we employ our CNC router to do the job, it makes sure this issue just can’t happen, if the kitchen cabinetry if level, so will the countertops!
CNCROi.com has a wonderful provider of kiln dried live edge wood, you want this made in Maple? No problem… how about Ash, Walnut or even 2x4s, we can glue it together, flatten it and make it parallel for a whole host of uses.
When it comes to custom cabinetry, CNCROi.com can also make that, so we aren’t limited to only custom flat kitchen countertops by any means.
https://www.youtube.com/watch?v=z1Frz_5yQd4/
Whether you want us to make the whole thing or only part of a cabinetry job, we are happy to do whatever needs to be done.
For this job, the wood might look a little rough but it doesn’t matter, this is the outer layer that protects the inner parts, once CNCROi.com has flattened the boards, cleaning it in the process, the natural beauty of the live edge Maple slab comes to life for these flat kitchen countertops.
What I’m doing here on this CNCROi.com is showing you the before and after aspect of this job, of course, there are two sides to each of these slabs that will be further cut to shape and size by the customer to fit on their custom now flat kitchen countertops.
It’s like night and day, the above is before and below is after, you can’t find wood this huge anymore so making a glue-up is a wonderful and very cost effective manner to accomplish great width for custom tables, benches and flat kitchen countertops.
If you are wondering what else we can do at CNCROi.com, well, for a kitchen specifically, we can also make dimensional door covers.
https://www.youtube.com/watch?v=oPnWLWwNDeQ/
Essentially, anything you want made, we have the software and hardware to make it happen.
Again, above is before, below is after, it’s just so beautiful and spectacular how much of a transformation these flat kitchen countertops went under during the CNC routering process, everything is just so smooth, all the customer needs to do is cut to size and sand then finish and they’ll have wonderful Maple countertops for life.
CNCROi.com can also make custom glass etching as well, whether you wish to have dividers or what have you, our laser can make very high quality etching in a variety of glass panel types and sizes.
https://www.youtube.com/watch?v=vdq7PIvWzF8/
We can also do the electronics to introduce mood lighting if you so desire.
Before above, after below, any mix and match of glues, resins or other fillers are no match for our carbide wood chipper, we power right through it all, leaving a nice smooth finish that makes your job as a carpenter so much easier to then create your own masterpieces.
Not only that, we can also work off wood or other materials, so every aspect of your furniture or cabinetry requirements can be branded or personalized to your heart’s content.
https://www.youtube.com/watch?v=yS9fRYTcOx0/
This is why I have the best job in the world, I help bring a little custom to everybody’s life, doing amazing work with only the best of clients across North America.
These may seem like strange off cuts to be glued together but they will for an L, the two other pieces additional straight countertops and there is another piece that can be used for an island butcher block, the nice thing about these flat kitchen countertops is that after a few years of use, they can be sanded again and finished for a brand new look.
If you are looking for something more in the traditional shaker style, although these slabs of Maple aren’t cut in that manner, they could have just as easily been transformed by CNCROi.com into shaker style doors and cabinetry.
https://www.youtube.com/watch?v=iYtRoMtkQjw/
Your options are endless, we work off sketches, dimensional drawings as well as CAD documentation.
The only challenge after all this was flattened was bagging-up all the saw dust, this is why I call my full sheet CNC router a wood chipper, it plows through this wood and throws chips all over the place, and I have a full dust system at CNCROi.com that picks-up most of it too!
When it comes to producing flat kitchen countertops, CNCROi.com can make them for you any size, material, shape or wood species you want.
https://www.youtube.com/watch?v=vpvcYljzB6U/
CNCROi.com can also make accessories for your house from custom house number signs to height rulers!
Just look at the above picture and the one below, they look like completely different slabs of Maple, but they are the same one, somebody is going to love their new sets of custom flat kitchen countertops for generations to come.
Need something made? Contact CNCROi.com right now!
https://www.youtube.com/watch?v=fhwwm4DgLSA/